TLV GP10L PowerTrap® (Mechanical Pump with Built in Check Valves)

TLV GP10L PowerTrap® (Mechanical Pump with Built in Check Valves)

TLV GP10L PowerTrap® (Mechanical Pump with Built in Check Valves) uses motive medium pressure to discharge condensate, so there is no need for construction of an electricity supply. Maximum discharge capacity of approximately 1500 kg/h. Available in Cast Iron, Cast Steel and Stainless Steel.

Recovers and pumps condensate in order to recycle heat energy and water resources. The snap-action mechanism rapidly switches between sending condensate to the mechanical pump, preventing delay-induced leakage of motive medium (steam/air). The unit is powered by steam or air, so there is no need for electrical facilities, which makes it suitable for use in hazardous area installations. It is designed to allow maintenance without being removed from condensate recovery lines.

Application Areas: suitable for steam processes. Main Applications: reboilers, heat exchangers, air conditioning equipment, absorption cooling machinery, etc.

Key features:

• Available in Cast Iron, Cast Steel or Stainless Steel in sizes: 1" x 1" up to 1 1/2" x 1".
• Screwed BSP or Flanged end connections.
• Max Operating Pressure: 5 Bar.
• Temperature: 185°C.

Download our technical PDF datasheet for the TLV GP10L Power Trap (Mechanical Pump with Built in Check Valves).